ISC DW200, Manual

Page: 8 / 24

8
Deadweight
DW200.2: Issue A - Aug 2017
KG
1
C General Misuse
6
[B] Use
1. The DW200 is designed to be used as part of a roped access system with twin ropes, work posi-
tioning harness and associated equipment
2. The DW200 should be used with a parapet wall with a minimum height of 300mm (12”)
3. The DW200 should be used with a parapet wall with a maximum height of 1800mm (59”)
4. Wheel brake operation. To unlock the wheel, push down the braking lever on the side marked OFF
The wheel will now rotate. To lock the wheel, push down the braking lever on the side marked ON.
Wheel brake operation. To unlock the wheel, pull the red locking bolt out and rotate 180
o
counter
clockwise. The wheel will now rotate. To lock the wheel, reverse this process.
5. Care should be taken when repositioning the DW200 whilst a person is suspended. This option
should be thoroghly risk assessed by a competent person
6 If no parapet wall is available, then the DW200 may be tied back to a suitable anchor to prevent
unintentional movement. Soft slings should be used around the rear wheel support assembly [11]
This option should be thoroghly risk assessed by a competent person