background image

 

 

5

DW200.2: Issue A - Aug 2017

Deadweight

[A] General Limitations

1.  The Deadweight should not be used on a surface that slopes more than 5

o

.

2.  The Deadweight must be used so that the operator is in line with the equipment’s direction to 

prevent the possibility of a pendulum occuring in the event of a fall

3.  Ensure that the strength of the structure is adequate 

4.  The Deadweights should not be used on frozen surfaces. The presence of ice may cause the 

unit to slip

5.  The Deadweight is for use by a single person. In the event of a rescue being required, the Dead-

weight can be used with a 2 person load in accordance with PD CEN/TS 16415: 2013

6.  Do not use Deadweight anchors outside of their limitations as outlined in this manual

7.  The user shall be equiped with means of limiting the maximum dynamic forces exerted on the user 

during a dynamic event to less than 6kN

8.  If the intention is to combine PFPE for Fall Arrest with Deadweight Anchors the user should seek 

guidance from the manufacturer as to its suitability. Always ensure that all components within a 

safety system are compatible and allow the system to function safely 

1

B Use

Summary of Contents for DW200

























Reviews: