background image

7

Helpline No: UK 0151 649 1500 / IRE 189 094 6244

GB

4. Using the treatment of electric tools

Do not overload your tool. Only use suitable 
electric tools to perform your work.

Using the right electric tool allows you to work 
better and safer within the toolʼs quoted capacity 
range.

Do not use an electric tool whose switch is 
defective.

An electric tool that no longer can be switched on 
or off is dangerous and must be repaired.

Pull the plug out of the socket and/or remove
the battery before making any adjustments to
the tool, changing accessories or put the tool
down.

This precaution eliminates the possibility of 
inadvertently starting the tool.

When not in use, store electric tools out of the 
reach of children. Do not allow those persons 
to use this tool who are unfamiliar with it or 
who have not read these instructions.

Electric tools are dangerous when they are used 
by inexperienced persons.

Take good care of your tool. Check that 
moving parts properly function and do not jam, 
that parts are not broken off or damaged in any 
way and that the tool can be used to its full 
capacity. Have damaged parts repaired prior to 
using the tool.

The cause of many accidents can be traced back 
to poorly maintained electric tools.

Keep your blades sharp and clean

.

Properly maintained blades with sharp edges jam 

less frequently and are easier to use.

Make sure to use electric tools, accessories,
attachments, etc. in accordance with these
instructions. Take the conditions in your work
area and the job in hand into account.

Using electric tools for applications other than 
those intended can lead to dangerous situations.

5. SERVICE

Have your tool repaired only by authorized 
specialists using original replacement parts.

This will ensure that your tool remains safe to use.

Safety instructions for hedge trimmers

Read the safety instructions and operating instruc-
tions carefully and follow them.

1.

Before carrying out any work on the hedge trim-
mer, pull the mains plug, for example
- Damage to the cable

- Cleaning the blades
- Checking in the event of faults
- Cleaning and maintenance
- Putting down without supervision

2.

This machine can cause serious injuries. Read
the operating instructions carefully for details of
the correct handling, preparation, maintenance,
starting and shutting down the machine. Make
yourself familiar with all the adjustable parts and
how to use the machine correctly.

3.

The hedge trimmer must be held in both hands.

4.

Check the connection cable for signs of damage
and ageing before use.

5.

The hedge trimmer may only be used if the con-
nection cable is undamaged.

6.

Check the cutter at regular intervals for signs of
damage and have any repair work to the cutting
tool carried out correctly and then ask your elec-
trician.

7.

If the cutter blocks, for example due to thick
branches, etc. the hedge trimmer must be
stopped immediately – pull the plug and only
then may the cause of the blockage be removed.

8.

Always place the cover over the cutter when
transporting and storing the machine.

9.

Only use cables and plug equipment that is
approved for outdoor use.
- Connection cable HO7RN-F 2x1.0 with molded
plug.
- Extension cable HO7RN-F 3G1.5 with splash-
proof plug with earth contact and protective con-
tact coupling.
- We recommend that you use a leakage current
protection device or a residual current circuit
breaker with a maximum trip current of 30 mA
with electric tools. Ask your electrician.

10. Check and service the hedge trimmer properly at

regular intervals. Only replace damaged blades
in pairs. If the trimmer is damaged by dropping or
striking, you must have it checked by an expert.

11. Do not use the machine if it has a damaged or

excessively worn cutter.

12. Make yourself familiar with your surroundings

and watch for possible dangers that you may not
be able to hear due to the noise generated by the
machine.

13. Never try to work with an incomplete machine or

a machine with unapproved modifications.

14. Do not use the hedge trimmer when people are

nearby, particularly children or animals.

15. Children are not allowed to use the hedge trim-

mer.

16. Always ensure that all the handles and safety

equipment is fitted when the hedge trimmer is in
use.

17.

Keep all body parts away from the blade.

Summary of Contents for challenge Xtreme CXHT 550















Reviews: