background image

TRANSLATION OF THE ORIGINAL INSTRUCTIONS

8

ZERO 

MY20

EN 428001318037

Use and maintenance manual

REFRIGERANT

R290

The refrigerant 

R290

 is a gas that is compatible with the environment, but 

is highly 

flammable

. Be very careful when transporting and installing the appliance and 

during scrapping to avoid damaging the refrigerant circuit pipes.

IN THE EVENT OF DAMAGE

Keep flames or sources of ignition away from the appliance. Properly ventilate the 

premises for a few minutes.  Turn the unit off, pull the plug.  Notify the customer 

service department. The more refrigerant containing an appliance, the greater 

must be the environment in which there is the unit. In areas too small, in the event 

of leakage can form a flammable mixture of air and gas. 

The volume of the room 

where the appliance is installed must be at least 19 m³ for each cooling system 

present in the room.

ATTENTION

Maintenance must be carried out by trained technical personnel authorised to 

work on flammable refrigerants.

REFRIGERANT

R600a

The refrigerant 

R600a

 is a gas that is compatible with the environment, but 

is 

highly flammable

. Be very careful when transporting and installing the appliance 

and during scrapping to avoid damaging the refrigerant circuit pipes.

IN THE EVENT OF DAMAGE

Keep flames or sources of ignition away from the appliance. Properly ventilate the 

premises for a few minutes.  Turn the unit off, pull the plug.  Notify the customer 

service department. The more refrigerant containing an appliance, the greater 

must be the environment in which there is the unit. In areas too small, in the event 

of leakage can form a flammable mixture of air and gas. 

The volume of the room 

where the appliance is installed must be at least 17 m³ for each cooling system 

present in the room.

ATTENTION

Maintenance must be carried out by trained technical personnel authorised to 

work on flammable refrigerants.

Summary of Contents for ZERO MY20









































Reviews: