22
GELATO
SHOW
2
USE AND MAINTENANCE MANUAL
428000485237
EN
12.1
12.1.1
Button 1 (red LED)
Normal operation:
- Pressed for 5 seconds, it resets the HACCP alarm (HA or HF) if active.
LED:
- steady: HACCP alarm for exceeding threshold and times (HA alarm).
- continually fl ashing: HACCP alarm for exceeding threshold and times after power outage
(HF alarm).
Button 2 (yellow LED)
Normal operation:
- Pressed for 1 second, it activates/deactivates the light for output relay aux 1.
LED:
- steady: Light on (output relay aux 1 active)
Button 3 (green LED)
Normal operation:
-Pressed for 5 seconds, unit ON/OFF.
LED:
- steady: Adjustment in operation.
Please Note: The ON/OFF function depends on an enabling parameter
(if not enabled, the control is always ON). The LED shows the status.
Button 4 (orange LED)
Normal operation:
-Pressed, it increases/decreases the heating power in the external glass anti-fogging system
LED:
- steady: Anti-fogging system in operation at maximum power
-off: Anti-fogging system in operation at half power
Button 5 (green LED)F
Normal operation:
-Pressed for 5 seconds it activates the continuous cycle (after being pressed for 5 seconds)
LED:
- steady: Continuous cycle activated.
Attention
The electronic control board
is installed already programmed.
Any changes to the control board
settings can be
carried out exclusively by qualifi ed
technical personnel.
USER INTERFACE
BUTTONS AND LED
Summary of Contents for 120 RV TB
Page 33: ...33 EN GELATOSHOW 2 USE AND MAINTENANCE MANUAL 428000485237 Attachment 3 412100571000...
Page 35: ......
Page 36: ......
