iDS6
Series User’s Manual
iS5 Communications Inc.
30
Device Server Management
5.1.4
5.1.4.1
Access IP Control List
With the Access IP Control List you can allow only specific remote host IP addresses to
prevent unauthorized access. If a host’s IP address is in the accessible IP table and
Activated, then the host will be allowed to access the Device Server.
Access IP Control List interface
The following table describes the Access Control List interface page.
Label
Description
Enable IP Filtering
When this box is checked IP Filtering is enabled. If it is left
unchecked IP Filtering is disabled and any host can access the Device
Server.
Activate the IP
When any of these lines is checked that line will be used to filter the
allowed IP Addresses.
IP Address
Enter the IP Address or the IP Subnet to be allowed.
Netmask
Enter 255.255.255.255 to allow only a specific IP Address or enter
the Subnet Mask of the Subnet (eg. 255.255.255.0) to allow all IP
addresses on that subnet.
Apply
Click “
Apply
” to activate the configurations.
