IRTrans Ethernet PoE, Hardware Manual

Page: 13 / 16

Hardware Guide
Ethernet - Ethernet PoE
© 2012 IRTrans GmbH
13
The IP Settings dialog to configure
the IP parameter. The following fields
are defined:
Use DHCP : Activates the automatic
IP assignment via DHCP.
Fallback … : When no DHCP server
is available the device falls back to
the default address 192.168.0.32
after 30s.
IP Address : Manually configured IP
address
Subnet mask : Manually configured
IP subnet mask
Default Gateway : Manually configured default gateway
In the lower lines the currently active parameters including the MAC address are
displayed.
The button „Store Configuration“ transfers all values to the non-volatile EEPROM
of the device.
The Access Rights dialog configures the access rights of the device. If no values
are entered here, any client can access the device. As soon as at least one value
is entered only clients that fit into at least one of the entries are allowed to access
the device.
Each entry consists of an IP address
and a subnet mask: 192.168.0.0 /
255.255.255.0 enables all clients
within the network 192.168.0.x. An
entry 192.168.0.1 / 255.255.255.255
allows only one client to use the
IRTrans LAN. The access rights are
active for all TCP and UDP functions.
To avoid a complete lock-out it is always possible to access the web front end
from within the local network of the device – even if there is no entry for that sub-
net.