Hardware Guide
Ethernet - Ethernet PoE
© 2012 IRTrans GmbH
11
7. Start-Up
For configuring the IRTrans Ethernet / PoE there is a password. By default
(factory settings) this password is:
user: admin
password: irtrans
The password may be changed in the user interface.
The IRTrans Ethernet / PoE devices ship with DHCP enabled. Hence the IRTrans
searches for a DHCP Server and requests an IP adress with its MAC. The MAC
adress is printed on the label.
If there is no DHCP server or the server does not assign an IP adress to
the IRTrans the device will fall back to the IP adress
192.168.0.32
.
Included in the IRTrans software suite is the tool „IPAssign“. It is available both
as GUI (Windows) and as console (Windows & Linux). Using IPAssign it is pos-
sible to modify the IRTrans IP settings. IPAssign „mimics“ a DHCP server for this
purpose therefore the DHCP ports must not be blocked by a firewall.
IPAssign searches the network for IRTrans devices and sorts them according to
MAC adresses. An entry marked with „DHCP“ means that this device obtained ist
settings from a DHCP server. After selecting an IRTrans device its settings can
be changed. Writing the settings to the device („Set IP“) requires the correct de-
vice password to be entered
Now knowing the IP adress of the IRTrans the IRTrans server can be started.
Additional settings can be modified by the IRTrans servers „device status“ dia-
logue or the devices web interface.
Summary of Contents for Ethernet PoE
Page 1: ...Hardware Guide Ethernet Ethernet PoE Version 2013 02...
Page 16: ......
