Title
750598 SingleHeater Cassette
Id
Manual EN
Author
Andreas Lundevall
Version
2
8 of 20
Date
2014-09-29
Installation instruction
5
Check that the contents correspond with the dispatch note.
Install the cassettes in the intended locations. Be careful when handling and installing the cassette.
NOTE! Electrical connections must only be made by a competent electrician.
The SingleHeater can be installed side by side or lengthways.
The width of the warmed area can be adjusted by installing the cassettes at an angle. Maximum heating width is 270 mm for the 360 mm cassette,
400 mm for the 500 mm cassette and 690 mm for the 790 mm cassette.
Cassettes with external fans can be installed with a minimum gap of 10 mm between each unit. In case of integrated fan a distance of at least 100
mm between the cassettes is valid.
External fans should be used in high ambient temperatures >45°C or in dirty environments.
Cassettes should be shielded to prevent any irritating light leakage.
At installation of cassettes a distance of at least 100 mm to any stationary flammable material must be maintained.
Attachment:
At the upper side of the SingleHeater there are two M6 screws with a distance of 244mm
Along the sides of the SingleHeater profile there are slots designed to fit a M6 hex nut to enable mounting without fixed locations, which increase the
adjustability.
