Overview: Control Module Interface
1 - Program Switch
Three-position slide switch used to select Program A, B or C for
setup, program review and manual operation.
2 - LCD Display
High-contrast LCD panel displays all controller programming and
operating information.
3 - Plus and Minus Buttons
Push buttons used to increase and decrease display values during
controller setup, programming and manual operations. Adjusts values
incrementally (press and release) or by rapid scrolling (press and
hold).
4 - Dial
A 25-position rotary switch used to select stations, start times,
watering days and special functions for setup, programming and
manual operations.
5 - Manual Button
Push button used to start and control manual operations by station.
Also serves as a “Next” button to step forward through various setup,
programming and manual operations.
6 - Function Switch
A three-position slide switch used to select one of three controller
function modes:
Off or Stop
-
Stops all current watering operations, and
prevents all automatic and manual operations.
Set Programs
-
Enables automatic watering program setup
values to be selected and changed.
Run or Manual
- Normal switch position for all automatic and
manual watering operations.
7 - Semi-Auto Start Button
Push button used to manually start an automatic watering Program.
Also used to initiate the Station Test Run operation.
6
