Changing Nozzle
Adjusting Spray
Remove and
flush screen
as needed.
Cleaning Screen
The riser is keyed
to fit the body in
one position to
maintain the left
stop setting. Insert
the riser into the
body and rotate it
until it is seated
properly.
© 2010 Irritrol • www.irritrol.com
Form Number 373-0355 Rev. B
Check Valve
The check valve is factory
installed in position A.
The Platinum Sport Rotor comes
with seven nozzle sizes from
7 to 27 GPM (31.8 to 122.7 LPM). To
change the nozzle, insert the blade
end of the sprinkler tool or a
screwdriver through the cap. Turn
the nozzle screw out until it clears
the nozzle. Pry the nozzle out at the
bottom and install the new nozzle.
Return the nozzle screw to its
previous position.
Turn the nozzle screw in to diffuse
and shorten the spray radius.
The Platinum Sport Rotor is
equipped with a two-way check
valve. To eliminate check valve
function,
install the check valve
disk in position B.
