Page 26
REMOTE CONTROL
Handling and location of the remote controller
Use the remote controller at a distance of 26 ft., or less, from the appliance. Point it towards the receiver on the air
conditioner. Communication is confirmed with a beep.
CAUTIONS
•
The air conditioner will not operate if curtains, doors or other materials block the signal from the remote control to
the air conditioner.
•
Avoid
Liquids
Direct Sunlight
Extreme Temperatures
•
If the infrared signal receiver on the indoor unit is exposed to direct sunlight, the air conditioner may not function
properly.
•
If other electrical appliances react to the remote controller, either move these appliances or consult your local
dealer.
Replacing Batteries
The remote control is powered by two AAA alkaline batteries housed in
the back of the remote. (Do not use rechargeable batteries)
•
Remove the cover by pressing down and sliding back.
•
Remove the old batteries and insert the new batteries, observing
polarity.
•
Replace the battery cover.
NOTE
:
When the batteries are removed, the remote control erases all settings.
After inserting new batteries, the remote controller settings must be
selected.
Don
’t mx old and new batteries, or batteries of different types.
Don
’t leave batteries in the remote control if it won’t be used for more than two months.
Remote Control Specifications
Rated Voltage
3.0V
Lowest Voltage of CPU Emitting Signal
2.0V
Signal Receiving Range
26 ft
Environment
23-140
︒
F
The illustrations in this manual are for explanation purposes only. The actual shape of remote controller may be slightly
different.
An audible sound will be heard when the buttons are pressed to change settings or modes.
When using the panel controls to select any change, this change will not be received by the remote. The next change
by the remote control, the change will update the function for the mode, fan temperature and other settings.
Summary of Contents for U-SHAPE Series
Page 6: ...Page 6 ...
Page 27: ...Page 27 Function Buttons ...
