3 of 10
STEP 1
Lighting- fully open, 2nd ‘click’
Pull the air wash lever open towards you which will fully
open all necessary vents to start the fire. Place firelighters/
newspaper and dry kindling wood on the grate. Light the
paper or firelighters and leave the door ajar to allow the
fire to establish. Add a few small diameter logs and after
the fire is established larger logs can be introduced, usually
after 10-15 minutes. The stove door should be closed fully
at this point. Move to step 2.
Do not run the fire with the door ajar except for initial
lighting and refuelling as this can cause over firing and
damage the appliance.
STEP 2
Moving towards optimum temperature
When an optimum temperature of between 150 and 250
Celsius on the outer body of the stove is reached push
the slider again further towards the stove to its second
location. This will reduce the secondary air and slow
the rate off enough to allow the stove to operate at its
optimum temperature, where you can see the flames and
slow efficient burning of the logs.
Burning seasoned or kiln dried wood with a moisture
content of under 20% is essential for a smooth transition to
optimum stove temperature.
Lighting and controlling the fire
Warning: This appliance will be hot to touch during operation. Ensure a pair of stove gloves are worn at
all times when operating and refuelling the appliance.
First position
Second position
