Page of 20
11
OPERATION
1. CUTTING WOOD
1. Turn on the Twin Cutter.
WARNING:
ALLOW THE BLADE TO REACH FULL SPEED BEFORE CUTTING.
OTHERWISE “KICKBACK” MAY RESULT, CAUSING SERIOUS INJURY.
CAUTION:
WHEN YOU RELEASE THE ON/OFF SWITCH, ALLOW THE BLADES TO
COME TO A COMPLETE STOP.
2. Hold the saw so that the blades are perpendicular to the workpiece.
3. Tilt the saw upwards so that it is angled at
approximately 30°, keeping the blade
perpendicular to the plane of the workpiece.
4. Move the blades along the cutting line. Do not
use excessive force. Allow the Twin Cutter to do
the work.
