5
•
Never leave tool running unattended.
UNPACKING
When unpacking the Bench Grinder, please check if any parts are missing or broken, please call
the distributor. Carefully remove the grinder and related hardware from the carton and examine it
thoroughly to insure it has not been damaged. This carton should contain the following items:
Description Qty
Bench Grinder . . . . . . . . . . . .. . . 1
Eye Shields . . . . . . . . . . . . . . . . . 2
Tool Rests . . . . . . . . . . . . . . . . . . 2
Spark Guards . . . . . . . . . . . . . . . .2
Manual . . . . . . . . . . . . . . . . . . . . ..1
Short bolts . . . . . . . . . . . . . . . . . . 4
Bolts . . . . . . . . . . . . . . . . . . . . . . . 2
Long bolts . . . . . . . . . . . . . . . . . . .2
Mounting Rods . . . . . . . . . . . . . . .2
Washers . . . . . . . . . . . . . . . . . … .2
Brackets . . . . . . . . . . . . . . . . …. . 2
Large Washers . . . . . . . . . . . . . . . 6
Work lamp (only for #24288) . . . ..1
ASSEMBLY
SWITCH
The switch is located on the front of the grinder near the bottom. To turn the tool ON, depress the
rocker switch at the top near the word ON. To turn the tool OFF, depress the bottom portion of the
rocker switch near the word OFF.
INSTALLING TOOL RESTS
Turn off and unplug the bench grinder. Remove the tool rests from the top portion
of the poly-foam carton liner and install them to the wheel guards as shown in the
figure. Use the bolts and washers from the plastic bag to secure them in place as
shown in Figure 1.
NOTE:
There is a left and a right tool rest. Refer to Figure 1 to ensure that you
install them correctly. When in actual use, the tool rests should be adjusted to
within 1/4in. of the grinding wheel or other accessory being used.
INSTALLING THE SPARK GUARDS AND EYE SHIELD BRACKETS
Turn off and unplug the bench grinder. The spark guards are packed in
the plastic bag shipped with your grinder. Select from the bag, the two
spark guards and the two smaller bolts and washers. Install the spark
guards to the wheel guards of your grinder as shown in Figure 2. Adjust
them to within 1/16in. of the grinding wheel or other accessory being
used. NOTE: There is a left and right spark guard. Refer to Figure 2 to
ensure, that you install them correctly.
