GENERAL SAFETY RULES
WARNING:
Read and understand all instructions.
Failure to follow all instructions listed below may
result in serious bodily injury or death, and/or property damage.
WARNING:
The warnings, cautions, and instructions discussed in this instruction manual
cannot cover all possible conditions or situations that could occur.
It must be understood by the
operator that common sense and caution are factors that cannot be built into this product, but must be
supplied by the operator.
•
Use the right tool for the job.
Do not attempt to force small equipment to do the work of larger
industrial equipment. There are certain applications for which this equipment was designed. It will do
the job better and more safely at the capacity for which it was intended. Do not modify this equipment,
and do not use this equipment for a purpose for which it was not intended.
•
Check for damaged parts.
Before using this product, carefully check that it will operate properly and
perform its intended function. Check for damaged parts and any other conditions that may affect the
operation of this product. Replace damaged or worn parts immediately.
INTRODUCTION
REC key/OK key
Mode key
LED light
On/Off key/Fill light
Shooting key
HDMI output
Reset hole
Lens
TF card slot
Speaker
Up key/FB/
Down key/FF/Volume-
USB output
AV output
