Installation
Installation and Removal of SD Card
1. In the direction as indicated, insert the TF card into the slot until it is held firmly.
2. To take the TF card out, slightly press the TF card to eject it from the slot.
Note:
1. Insert the TF card but do not force it into place; if the direction is reversed, the device and the TF card may
be damaged.
2. When the TF card is inserted into the device, the machine will set the TF card as the preset storage unit
and the data in the original TF card will be unreadable.
3. If the TF card is incompatible with the device, please insert the card again or replace it for retry.
4. Always use a high-speed TF card.
Charge Battery
1. Directly connect the car charger to the DVR for charging, even if it is switched off.
2. For USB charging, connect the USB data cable to the PC with the other end to the DVR, even if it is
switched off.
3. To determine power capacity in the battery, refer to the following icons:
Full Middle Low
OPERATING INSTRUCTIONS
DVR On/Off
1. Hold the On/Off key for around 1second to switch on the device.
2. Hold the On/Off key for around 3seconds to switch off the device.
Switch Working Modes
Press the Mode key to switch video/image.
means video mode
means image mode.
Press the Mode key twice to enter the playback mode.
How to Enter System Setup Option
Hold the Mode key, then press the OK key/REC key to enter the “System Setup” option. In such case, the bar
of “System Setup” shows a blue background.
1. Date/Time: You may set date/time.
2. Auto Switch-off: You may set the automatic switch-off time.
3. Beep Sound: You may switch on/off key tone.
4. Language: You may set the desired language menu.
5. TV mode: NTSC/PAL.
6. Light source frequency: 50Hz/60Hz (current frequency).
