13. Stand tent up on it’s side and slide the four M8 x 55mm
bolts and mounting plates into each mounting rail and
install plastic end caps.
Your tent is now ready to be fitted to your vehicle.
PRE-INSTALLATION
• It is the responsibility of the installer to ensure the roof rack has an adequate load rating to support the
Ironman 4x4 Luxury Rooftop Tent. Tent weighs approximately 55kg.
• Although two people can possibly lift the Luxury Rooftop Tent onto the vehicle, we recommend that four people
be used due to the weight and size of the tent. This is to prevent personal injury or damage to the vehicle
• If mounting the tent for rear opening, make sure that the tailgate operation does not interfere with tent.
• When lifting the tent onto the roof of the vehicle, make sure that mounting bolts do not contact the roof as this
will cause damage to the vehicle. In some cases the mounting bolts might need to be shortened to clear the
roof.
•
In some cases, 6.5mm holes will need to be drilled through roof bars to secure tent.
The manner in which your Luxury Rooftop Tent can be attached depends on the type of roof rack / roof bars fitted to
your vehicle.
Below are some of the more common roof rack styles and mounting techniques.
This diagram shows the rooftop tent clamped to a
cross bar using clamp plate and bolts provided.
This diagram shows the rooftop tent clamped to a
roof rack using clamp plate and bolts provided.
This diagram shows the rooftop tent bolted to
a roof bar by drilling through the roof bar and
attaching with bolts provided.
INSTALLATION HINTS
5 - 15
