Ironman4x4 800 Series Installation Manuals Download Page 10 | Manualshive

Page: 10 / 16

Ironman4x4 800 Series Installation Manuals Download Page 10

STEP 13

Attach drawer fronts to front of carcass
using M6 x 16mm CSK (FIG 24) screws as
shown (Diagram 1) in seven (7) places on
each drawer.

NOTE: These same screws also attach the
drawer end to the drawer carcass so make
sure drawer end is in place first and screws
go through both as shown.

STEP 14

Insert drawer assembly into frame.

STEP 15

Install Drawer Stoppers to outside of draws using M6 x 16mm Pan Head (FIG 26) screws as shown in two (2)
places on each drawer.

NOTE: Ensure drawer is pushed in far enough so that upon installing stoppers they are behind the stoppers
already attached to frame. (Drawer missing from diagram).
Also ensure stoppers are attached opposite each other as shown.

Page 10 of 16

Diagram 1

NOTE: This image may confuse as
the drawer stop is pictured but the
drawer is missing from diagram. The
idea is to show how the assembly
works and how it looks in situ. So
imagine this drawer stop bracket is
on the drawer.

IMPORTANT: IT IS RECOMMENDED TO INSTALL FRAME INTO VEHICLE BEFORE COMPLETING THIS STEP

FOR EASE OF INSTALLATION. PLEASE REFER TO PAGES 12-16 FOR YOUR VEHICLE SPECIFIC INFORMATION.

Drawer System Instructions

«
...
8
9
10
11
12
...
»

Summary of Contents for 800 Series

















Reviews:

No comments