Ironman Fitness 6877.1-051116, Owner'S Manual

Page: 16 / 25

Appearance upon completion of Step 3.
3A. Attach the Rear Crossbeam (G) and the two Mounting Plates (L) to the
two rear Vertical Posts (B) at the location of the matching by using:
4 - (7)
Hex Head Bolt M12x1.75x80L
8 - (52)
Washer D13xD24x2.5
4 - (76)
Nylon Nut M12
Note: The Rear Crossbeam (G) should be installed with the IRONMAN
logo facing forward.
3B. Attach the Upper Beam (C) and two Mounting Plates (L) to the side
Vertical Posts (B) at the location of the matching by using:
4 - (16)
Hex Head Bolt M12x1.75x105L
8 - (52)
Washer D13xD24x2.5
4 - (76)
Nylon Nut M12
3C. Attach the Upper Beams (B) and two Mounting Plates (L) to the side
Vertical Posts (B) at the location of the matching by using:
4 - (16)
Hex Head Bolt M12x1.75x105L
8 - (52)
Washer D13xD24x2.5
4 - (76)
Nylon Nut M12
It is recommended that bolts and screws of the structure NOT be thoroughly
tightened until step 4.
STEP 3
14