29
Step 8
Remove two sets of
Pre-installed Hardware
Da1 from
Top Bar II
A2.
Insert the small end of
the Connecting Bar
D1 into the socket of
the Top Bar II
A2, secure with
t
he t
wo sets of
Pre-installed Hardware
Da1 that were removed.
Remove two sets of
Pre-installed Hardware
Da5 from
the Legs
A
1
4 and A
1
4A.
Remove one set of
Pre-installed Hardware
Da4 from
the Connecting Bar
D1.
Attach
the Connecting Bars
D6 and D7 onto
Legs
A
1
4, A
1
4A, and
Connecting Bar
D1 with
the
two sets of
Pre-installed Hardware
Da5 and one set of
Pre-installed Hardware
Da4 that were
removed.
Step 9
Remove four sets of
Pre-installed Hardware
Da7.
Remove two sets of
Pre-installed Hardware
Da6.
Insert
the Main Spinning Bar
D2 into the hole on the
Spinning Disk
D9.
Insert
the Base Bar
D3 into
Main Spinning Bar
D2.
Attach both
Supporting Brackets
D8 onto
the Base Bar
D3 and bottom of
the Spinning Disk
D9 with
the
four sets of
Pre-installed Hardware
Da7 and two sets of
Pre-installed Hardware
Da6 that were
removed.
Da1
Da4
Da5
Da5
D1
A2
A14A
A14
D6
D7
Summary of Contents for 8103
Page 2: ...1 8103 3 060716 ...
Page 6: ...5 IMPORTANT LABELS ...