Ironkids 8030, Owner'S Manual, Page: 7 / 19

6
LOCATION AND PLACEMENT OF YOUR MERRY GO ROUND
Proper placement and maintenance of protective surfacing is essential. Be sure to:

Extend surfacing at least 6 feet (1.83 m) from the equipment in all directions. Merry Go Round
must be placed a minimum of 6 feet (1.83 m) from any structure or obstruction such as a fence,
garage, house, overhanging branches, laundry lines, or electrical wires.

Do not place your Merry Go Round underneath electrical lines. If you must, ensure that there
is a minimum overhead clearance of 6 feet (1.83 m).

Do not install Merry Go Round over concrete, asphalt, packed earth, grass, carpet, or any other
hard surface. A fall on to a hard surface can result in serious injury to the user.

The following diagram shows how much obstacle-free surfacing should be used for the
Merry Go Round.
TOOLS REQUIRED FOR ASSEMBLY
Allen Wrench 5mm
2 PCS
(Included)
Allen Wrench 3mm
1 PC
(Included)
Hammer
1 PC