PowerTower Hitch Hauler
by IRONguard Safety Products
26
SECTION
3
MACHINE OPERATION
Load the PowerTower
BEFORE OPERATING THE POWERTOWER YOU MUST READ AND UNDERSTAND
THE POWERTOWER OPERATOR’S SAFETY MANUAL.
DO NOT ATTEMPT IF YOU ARE NOT PHYSICALLY ABLE TO LIFT AND POSITION
THE POWERTOWER ON THE HITCH HAULER. REMOVE COMPONENTS FROM
THE POWERTOWER TO REDUCE THE WEIGHT AND/OR USE TWO PERSONS TO
COMPLETE THE LOADING OF THE POWERTOWER ON TO THE HITCH HAULER. IF
AT ANYTIME WHILE LOADING THE POWERTOWER YOU FEEL UNCOMFORTABLE
HANDLING THE WEIGHT, CAREFULLY LOWER THE POWERTOWER DOWN TO
THE GROUND AND REMOVE FROM THE HITCH HAULER.
1.
To load the PowerTower on to the Hitch Hauler, tilt back the
PowerTower and approach the Hitch Hauler while centering the
PowerTower between the Rocker Plate Glides. Continue forward until
the PowerTower is over the top of the Rocker Plate Glides
(Figure 3-7)
.
2.
With the PowerTower “hooked” over the Rocker Plate Glides, lower
the PowerTower on to the Rocker Plate (
Figure 3-8
).
DANGER
NOTICE
CAUTION
WARNING
/ / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / /
Hook Here
Figure 3-7:
Center and Hook on to the Rocker Plate