11
OPERATING MANUAL
MAINTENANCE, CLEANING AND STORAGE
DRAINING THE AIR TANK
1. Place the air compressor above a container capable of holding water.
2. Slowly turn the drain valve knob to the open position. The water in the air tank will drain out
3. After all of the accumulated water has drained out, turn the drain valve knob to the closed
position to avoid leakage.
Note: draining the air tank may need to occur more frequently depending on the use. On
average the air tank will need to be drained every 2-3 days. Draining the air tank protects parts
from rust and corrosion.
AIR FILTER
1. The air filter is designed to reduce noise and help prevent particles from entering and
damaging the air compressor.
2. After being used for a period of time, the air filter will become clogged. This will reduce the
air intake of the air compressor and reducing performance. Therefore the air filter must be
cleaned or replaced regularly.
3. Open the lid on the air filter then remove the air filter element.
4. Clean the element by blowing/brushing off the dirt and dust. If clogged, replace with a
new air filter.
TESTING FOR LEAKS
1. Check all connections are tight. Do not over-tighten. A small leak in any hose or pipe
connection will reduce the air compressors performance.
2. Spray a small amount of soapy water on the area suspected of leaking. If the soap bubbles,
replace the broken part.
CLEANING
Clean items with a soft brush or wipe with a moistened cloth using a biodegradable solvent.
Do not use flammable liquids such as gasoline or alcohol. Always keep parts clean from dirt and
dust for better performance.
STORAGE
Before storing for a long period of time:
1. Turn off the power supply
2. Disconnect the power cord from the power supply and wrap the power cord around the
air compressor handle to reduce the risk of damage
3. Empty the air tank using the drain valve.
4. Clean the air compressor to remove all dirt and dust.
5. Cover the air compressor with a cover to protect the unit from dust and moisture Do not
stack or store any items on top of or around the air compressor damage could occur.
