6
TTD1146OF
Use only genuine replacement parts
Replacement parts not original may void your warranty and can lead to malfunction and
resulting injuries. Genuine parts are available from your dealer.
Do not modify the compressor
Do not modify the compressor. Always contact the authorized service centre any repairs.
Unauthorized modification may not only impair the compressor performance but may also
result in accident or injury to repair personnel who do not have the required knowledge and
technical expertise to perform the repair operations correctly.
Turn off the pressure switch when the compressor is not used
When the compressor is not used, turn the knob of the pressure switch OFF, disconnect it from
the power source and open the drain cock to discharge the compressed air from the air tank.
Never touch hot surface
To reduce the risk of burns, do not touch tubes, heads, cylinder and motors.
Do not direct air stream at body
Risk of injury, do not direct air stream at persons or animals.
Drain tank
Drain tank daily or after 4 hours of use. Open drain fitting and tilt compressor to empty
accumulated water.
Do not stop compressor by pulling out the plug
Use the “AUTO/OFF” lever of the pressure switch.
Use only recommended air handling parts acceptable for pressure not less than
125 psi (8.6 Bar)
Risk of bursting. Use only recommended air handling parts acceptable for pressures not less
than 125 psi (8.6 bar).
REPLACEMENT PARTS
When servicing use only identical replacement parts. Repairs should be conducted only by
authorised service agents.
GROUNDING INSTRUCTIONS
This compressor should be grounded while in use to protect the operator from electric shock.
The compressor is equipped with a three-conductor cord and three- prong grounding type
plug to fit the proper grounding type receptacle. The green (or green and yellow) conductor in
the cord is the grounding wire. Never connect the green (or green and yellow) wire to a
live terminal.
