2
Congratulations on the purchase of your Iron Rival Series water treatment system.
You have
purchased one of the finest iron treatment systems on the market today. The Iron Rival Series water
treatment system uses a multi-faceted treatment process consisting of a combination of aeration,
oxidation, and filtration for the reduction/removal of iron, manganese, and hydrogen sulfide from
your water supply.
This manual is designed to provide owners, installers, and service technicians with detailed
information about the installation, start-up, and operation of your new filter system.
The heart of your Iron Rival System is the Fleck 2510SXT control valve. It is manufactured by one
of the world’s largest water treatment companies. The Fleck 2510 control valve is well respected
for its reliability, serviceability, simple operation, and value. The integrated Fleck SXT digital
valve controller offers unsurpassed simplicity of operation, yet complete control over all important
valve operations. You can rest assured that you have made a solid investment in the quality of your
water supply!
Once installed and correctly set-up, your Iron Rival water treatment system is designed to offer low
maintenance operation. The control valve will perform regular backwash and regeneration
functions automatically. For your convenience, your system has been pre-programmed for you by
our technicians. Should you need to change any of the settings, simply following the instructions
provided in this manual.
Table of Contents:
OPERATING CONDITIONS …………………………………………………... 3
INSTALLATION …………………………………………………………..……. 4
Step 1 – Pre-Installation Inspection ………………………………….…… 4
Step 2 – Select an installation Site …………………………………..…... 4
Step 3 – Prepare Treatment Tank ………………………………………… 5
Step 4 – Turn off the Water & Electric Water Heaters ………………..… 7
Step 5 – Prepare and Install Inlet and Outlet Plumbing Connections ….... 7
Step 6 – Drain Line Installation ……………………………………….… 9
Step 7 – Control Valve Set-up …………………………………………... 10
Step 8 – Initial Start-up and Leak Testing ………………………………. 11
REGENERATION ………………………………………………………………. 13
CHANGING TIME OF DAY …………………………………………………… 14
USER PROGRAMMING MODE ………………………………………………. 14
MASTER PROGRAMMING MODE …………………………………………… 15
RESETS ……………………………………………………….………………… 16
CONTROL OPERATION DURING A POWER FAILURE …………………… 16
MAINTENANCE & TROUBLESHOOTING……………………………………. 17
WARRANTY INFORMATION ………………………………………………… 18
