Copyright 2020 Iron Bow Technologies
28
An example of a basic configuration would be (single space between words, commands
are not case sensitive):
xCommand Network Wifi Configure SSID:
mynetwork
Type:
WPA2-PSK
Password:
mypassword
i.
The “xCommand Network Wifi Configure” command is described in the
Endpoint Software API Reference Guide (CE9.12 or later)
Cisco supports the following authentication types:
Open
WPA-PSK
(AES)
WPA2-PSK
(AES)
WPA-EAP-PEAP
EAP-TLS
EAP-TTLS
EAP-FAST
PEAP
EAP-MSCHAPv2
EAP-GTC
The system only remembers one network at a time. If you change between different
networks, you have to type in the credentials again.