Copyright 2020 Iron Bow Technologies
20
Adjusting Speaker and Headphone Volume
Enabling and Disabling Headphone Operation
Enabling and Disabling Stethoscope Mode
The volume functions are controlled by the
+
and
–
signs. A volume
indicator bar is displayed on the top right hand side of the screen
indicating the volume level
The remote site audio is always available through both the system
speakers and available for listening using connected headphones. By
activation of the Headphone mode, the audio is only available through
connected headphones for private listening. On activation, the
associated LED illuminates above the control button.
Stethoscope Mode optimizes audio transmission of the stethoscope
signal connected to the stethoscope audio input, while automatically
muting the internal system microphone and auxiliary Cisco
microphone, if connected, to minimize room audio interference. If it is
required to transmit the microphone(s) as well as the stethoscope,
select the microphone mute button to “un-mute” the microphones. In
Stethoscope Mode, the stethoscope signal is only sent to the remote
end and will not play through the speakers. On activation, the
associated LED illuminates above the control button.