Assembly Instructions
38
3.Tighten Valve Pate to
Gusset and Valve Plate
to Beam Bolts
Tighten the bolts holding the valve plate to the valve plate gusset and tighten the
bolt holding the valve plate gusset to the beam
Using a Torque Wrench, Tighten; Valve Plate to Gusset bolt to 30 lb-ft. and Gusset
to Beam bolt to 33 lb-ft.
WARNING:
Failure to secure this bolt properly could result in the axle and
hydraulic reservoir separating from the beam during towing.
Valve
Plate to
Gusset
Valve Plate
Gusset to Beam
Summary of Contents for BH2W2016GX
