EN
2
For more information, visit global.irobot.com
Charging
• Place the robot on the charging station to activate the battery.
Note:
Your robot comes with a partial charge, but we recommend that you
charge the robot for three hours prior to starting the first cleaning job.
• If the ‘CLEAN’ text is pulsing while charging, the robot is in the middle
of a cleaning job and will automatically resume where it left off once
recharged.
• The robot uses a small amount of power whenever it is on the dirt
disposal. You can put the robot in a further-reduced power state
when not in use. For instructions and more details on this Reduced
Power Standby Mode, refer to the iRobot Home App.
• For long-term storage, turn off the robot by removing it from the dirt
disposal and holding down for 10 seconds. Store the robot in a
cool, dry place.
Cleaning
Use your robot frequently to maintain well-conditioned floors.
Using Your Roomba
®
Robot Vacuum
CLEAN
Light Ring While Charging
Solid: fully charged
Pulsing: charging
Turns off after one minute to save power
Just Press CLEAN
Tap to Start/Pause/Resume
Hold for 3 seconds to end a job
and put the robot to sleep
Hold 10 seconds to reboot
Positioning the Home Base Charging Station
WARNING:
To prevent the risk of your robot falling downstairs, ensure that
the dirt disposal is placed at least 4 feet (1.2 metres) away from stairs.
Good Wi-Fi
®
Coverage
*Objects are not to scale.
4 ft. (1.2 m) from stairs
4 ft. (1.2 m) in front
1.5 ft. (0.5 m)
both sides
