7) Use a rotary cutting tool to trim the vacuum housing pieces in half to create space in the
bin for the speakers.
8) Reinstall the smaller plastic piece and the latch spring into the top bin housing and screw
it into place. Make sure you have the plastic latch seated properly too.
9) Turn on your hot glue gun and apply glue to the two pivot arms on the latch at the back
edge of the bin.
10) Now use your rotary tool to remove the plastic lip at the rear of the bin bottom as shown
in the image below.
11) Reassemble the bin, being sure to capture the rear grill in place properly. Reinstall the six
screws to clamp the bin back together.
