Testing your electronics
1) Install 4x AA batteries into the battery holder and slide the power switch to ON.
2) A blue LED on the Bluetooth module should start flashing and the speakers should beep
to indicate pairing mode.
3) Connect your Bluetooth music player by going to your settings screen and selecting the
new Bluetooth device “XY-P40W.”
4) Select a song and make sure your speakers are playing properly. The indicator should
stay on while connected and blink slowly while playing audio.
Installing the electronics in your vacuum bin
1) Remove the vacuum bin from your robot and flip it upside down.
2) Use your #1 Phillips screwdriver to remove the six screws (circled in the image below)
holding the bin together and set them aside.
SPK2+
SPK2–
SPK1–
SPK1+
POWER–
POWER+
POWER
