User Manual
Settings
Calibration Process
www.irisbond.com
Page 41
Instructions:
1.
Decide on the number of seconds during which a target will remain stationary in
the Time per point (sec) field.
The default time is 1.0 seconds; you can change this to suit your needs. There are
two ways to enter the time value: using the + (more) button which increases the
time and – (less) buttons which decreases the time; alternatively, you can enter or
change the values directly.
2.
Decide on the number of points which will be shown on the screen in the
Calibration Points field.
By default 9 points are selected. For a more precise calibration choose 16 points.
For a basic calibration, choose 5 points. To select how many points you would like,
click on the corresponding button.
3.
Start the calibration process by clicking
Calibrate. The system will then show
you a series of points in different areas
of the screen and you must look at
each of them.
By default each point appears as a
white circle with a black spot in the
middle.
For users who have short attention problems or who tire easily we recommend:
5 points and a longer time for each point.
Calibration with just 1 point. See the section/appendix
Quick/automatic action buttons
to see the functions of all the menu buttons.