APPENDIX: B
CABLING
NightRunner is supplied with a 50ft water resistant CAT5 568B Straight-Thru Cable.
WARNING!
Although CAT5 cable is utilized,
NIGHTRUNNER IS NOT A NETWORK DEVICE AND MUST NEVER BE CONNECTED TO
ETHERNET EQUIPMENT SUCH AS SWITCHES, ROUTERS, PoE INJECTORS
etc.
Connecting to such devices could damage the camera beyond economical repair and also damage the IRIS595 controller and any other
equipment that may be on the network.
If the supplied cable is not long enough, contact your Iris dealer for information on our cable extension kits.
If you need to shorten the cable, please ensure the correct termination polarity is observed as shown below. Remember, NightRunner
has a
Straight-Thru CAT5 568B
cable.
WARNING!
NEVER USE A CAT5 CROSS OVER CABLE AS THIS WILL CAUSE PERMANENT DAMAGE TO YOUR CAMERA AND IRIS595
CONTROLLER. BOTH ENDS MUST BE TERMINATED AS SHOWN BELOW:
V3.00 Iss 05-06 18 - 20
PIN NUMBER
WIRE COLOUR
FUNCTION
1
White / Orange
DATA+
2
Orange
DATA-
3
White / Green
DC GND
4
Blue
DC+
5
White / Blue
DC GND
6
Green
DC+
7
White / Brown
VIDEO SIGNAL
8
Brown
VIDEO GND
