manualshive.com logo in svg

IRIS IRIS8 Series, Quick Reference Manual, Page: 12 / 30

Share
Download
IRIS IRIS8 Series Quick Reference Manual Download Page 12

1.

!

Power

!

IRIS8xx series DVR

ʼ

s can be run from +12 or +24VDC. Nominal load is around 500mA but the unit

!

will momentarily spike at around 1.5A during boot up so this should be considered when choosing

!

suitable isolation.

!

The power plug connects to the back of the unit and as well as the colour coded DC+ (RED) and DC

!

Ground (BLACK) wires there is a third wire (YELLOW) for connection to the ignition if required. For

!

standard operation, simply common the yellow ignition wire with the red DC+ wire.

2.

!

Cameras

!

Depending on the model, cameras are connected to the DVR via 1 or more breakout cables that

!

connect to DSub15 connectors on the back of the caddy. Each connector is labelled to show the

!

camera inputs and the first camera connector (only camera connector on the IRIS804) also includes

!

the composite video output, IR Remote Extender jack and a screw terminal block providing DC

!

output. Please note, the maximum output current supported by all DVR

ʼ

s is 2A. Using the DC output

!

will naturally effect the overall current draw of the unit so please bare this in mind if you intend to use

!

the DC output to power cameras for example.

v1.02 Page: 12

Section 7:

!

Connecting up your DVR 

Red - +12 or +24 VDC

Yellow - Ignition - Tie to DC+

Black - DC Ground

The first camera connector also features the composite 
video output, IR Extender socket & +12VDC outputs

Summary of Contents for IRIS8 Series































Reviews:

No comments