background image

2

Safety precautions

Carefully read the following "safety precautions" before using. Rules which must be abided by in order to prevent avoid-
able personal injury or damage to property are described here.

 Danger

Indicates content where improper usage carries a high risk of death or 
serious injury.

Unplug the 

product

 

In case of abnormalities or malfunction-
ing, you should immediately stop using 
and unplug the charging adapter from the 
power socket

-

cal shock.

[Examples of abnormalities]

•  Smell of scorching or abnormal sounds
•  Abnormal heating up of the charging adapter

 Stop using and contact the store where you pur-
chased the product, or contact the IRIS customer 
service center.

Important notes about the battery

Do not 

disassemble

 

Do not disassemble the battery

 

Do not change the battery

Doing so may cause the battery to heat up and 

Do not remove the battery except when dispos-
ing of the product.

 Warning

Indicates content where improper usage carries a risk of death 
or serious injury.

Prohibited

 

-

secticides, hair products, lubricating 
oils, kerosene, gasoline thinners and 
etc.)

Avoid getting 

the product wet

 

Do not put the mop head or the charg-
ing adapter in water, or get wet

Do not 

touch

 

Do not touch power spin board when in 
operation

Doing so may cause injury.

Do not 

disassemble

 

Do not disassemble, repair or modify 
this product

injury.
Contact the store where you purchased the prod-
uct, or contact the IRIS customer service center.

Prohibited

 

Do not sit or lean on the product

Doing so may cause injury or malfunction.

 

Do not use on towels or clothing

 

Do not allow children to use the prod-
uct by themselves

Doing so may cause injury.

 

Do not use near anything that falls over 
easily or breaks easily

Doing so may cause injury or malfunction.

Prohibited

 

Do not plug or unplug the charging 
adapter with wet hands

Doing so may result in electrical shock, burns 
or injury.

This symbol means 
"reminding".

Prohibited

This symbol means 
"forbidden".

Be sure to

This symbol means nec-
essary "instructions".

Prohibited

 

Do not charge the battery in a way other 

 

Do not charge the battery in locations 
with high temperatures or exposure to 
direct sunlight

 

-

erwise heat it up in any way

 

Do not drop the battery from high plac-
es, throw the battery, pierce the battery 
with nails, strike the battery with a ham-
mer, or trample the battery

 

Keep the battery from getting wet

Not doing so may cause the battery to heat up, 

or contamination of the surrounding environment.

Examplse of symbols

Summary of Contents for IC-M01
















Reviews: