11
→
Cleaning and maintenance
●
Before cleaning and maintaining,
charging adapter.
●
Do not spray with water. Doing so
may result in electrical shock, injury
or malfunctioning.
●
Do not use cleaners, thinners, benzene, bleach, etc.
●
Do not use chemically treated dust cloths.
■
Mop head, Shaft, Operating
handle
• Refer to the method for removing (P7), and then
remove the mop head, the Shaft, and the operating
Handle, fully wring out a soft cloth which has been
dampened with cool or warm water (no warmer
• I
-
-
ened with a diluted neutral kitchen cleaning agent. Then
fully wring out the cloth so that there is no cleaning
■
Pad attachment surface
If dust or dirt accumulates on the attachment surface
part of the mop pads, the attachment surface will
easily. If dust or dirt accumulates, use a toothbrush or
something similar to remove it.
※
If there is water in the water reservoir, that water
and maintaining.
●
When holding and moving the mop
head with water in the water res-
ervoir, make sure not to tilt. Or the
water may spill out and cause mal-
functioning.
■
How to drain the water from
the water reservoir
Open the water reservoir, tilt the mop
head, and drain out any water remaining
in the water reservoir
Press the water spray button several
times to get all of the water out
Press
■
Nozzle
If the nozzle gets clogged up, use the attached pin for
cleaning nozzle to clean it out.
