All necessary precautions must be adopted when
handling the appliance in order not to damage it,
respecting the indications on the packaging.
5
1. GENERAL DOCUMENTATION
1.1. GENERAL WARNINGS
1.2 INTRODUCTION
1.3 TRANSPORT AND HANDLING
Table 1
•
•
•
•
•
•
•
This manual is an integral part of the product, it
supplies all of the indications necessary for correct
installation, correct use and maintenance of the
machine.
It is mandatory for the user to read this manual care-
fully and always make reference to it. Moreover, it
must be kept in a place that is known and accessible
to the authorised operators (installer, user, mainte-
nance technician)
The holding cabinet is intended for professional use
and therefore only qualified staff can use it.
The holding cabinet is intended only for the use for
which it has been designed, i.e. for storage of food
products.
Products that require constant temperature control
and recording are excluded, such as:
- heat reactive chemicals
- medicines
- blood products
The manufacturer declines any liability for any damage
caused by incorrect or unreasonable use, such as for
example:
- improper use by untrained staff.
- modifications or interventions that are not specific
for the model.
- use of non-original spare parts or that are not
specific for the model.
- failure to comply, even partial, with the instructions
in this manual.
Installation must be carried out by authorised and
specialised staff, respecting the instructions in this
manual. The manufacturer declares and assigns to
each individual machine a Declaration of Conformity to
the 2006/42/EC Machinery Directive, to the 2006/95/EC
Low Voltage Directive and to the 2004/108/EC Electro-
magnetic Compatibility Directive.
Whenever the machine is supplied with the remote
condensing unit, it is the installer's responsibility to check
all connections and issue a declaration of perfect execu-
tion that is in compliance with the provisions of the above-
mentioned Directive. The joints made by IRINOX S.p.a.
are in compliance with Standard EN14276-2.
IMPORTANT NOTE:
IRINOX reminds you that all
machines must be subjected to periodic inspections in
compliance with the national standards in force.
In particular for the Italian market: a complete control of
the plant must be carried out and especially an inspec-
tion of the integrity of the cooling circuits under pres-
sure after ten years of operation as a set, as required in
Italy by Annex B of the Italian Ministerial Decree no.
329 of 1 December 2004 for sets belonging to catego-
ries from I to IV containing group 2 fluids.
NET
WEIGHT
kg
CARDBOARD PACKAGING
CRATE PACKAGING
L
(mm)
H
(mm)
D
(mm)
m
3
kg
Holding cabinet model
Condensing unit (if remote)
CP ONE
Condensing unit
240
840
2270
1190
2,27
275
L
(mm)
H
(mm)
P
(mm)
m
3
kg
930
2320
1230
2,65
410
38
690
450
720
0,22
58
700
450
780
0,25
76
