Fig. 20
19
3.4. STOP MODES
In case of emergency, to switch off the cabinet holder,
press P3 for 2 seconds and disconnect power
supply.
ATTENTION!
Press P3 with machine running to
place the cabinet holder in Stand-by: all the commands
are removed from the various components; the cabinet
holder IS NOT DISCONNECTED FROM THE POWER
SUPPLY.
3.5. RECOMMENDATIONS FOR USE
Before starting the machine, clean the inside of the cell
thoroughly (
see par. 4.2).
3.5.1. Pre-cooling
•
•
•
3.5.2. Loading the machine
Before using the cabinet holder for the first time or after a
period of downtime, pre-cool the cell by running the
machine on empty until the operating temperature is set.
In order to have good machine performance and
not have deterioration of food, we recommend you:
Make sure that a sufficient space is left between
the trays for suitable air circulation.
If the machine is not completely loaded, distribute
the trays and the load over the entire useful height
avoiding accumulation.
When the CP ONE is used in Positive mode
(20÷0°C), run the cabinet holder on empty for at least 4
hours in order to work at the desired relative humidity.
do not put hot foods or liquids in containers without
lids into the cell.
arrange the products in order to favour cold air circu-
lation throughout the cell.
avoid opening the door for a prolonged time and
frequently.
Fig. 22
OK!
NO!
Maximum load per shelf: 35 kg
Fig. 21
