Iridium Axcess Point, User Manual

Page: 6 / 28

Page
6 of 28
Iridium Axcesspoint and Iridium Axcesspoint Mail & Web User Manual
5. Iridium AxcessPoint Mail & Web Software Activation
When the software is first installed, the Activation Wizard is launched automatically. The Activation Wizard
sets up your account. Follow through Activation Wizard screens to active your Iridium AxcessPoint Mail &
Web account.

Select “Enter User ID and Password” if you have already registered on Iridium.com/AxcessPoint

On the next screen, ensure that “Iridium AxcessPoint WiFi” is selected.

Next, enter in your full name, username and password provided at registration.

Next, you will see a screen indicating that registration is complete.

Click <OK>

You will see a screen stating that activation was successful.

Click <Finish> to close the screen.
Your account has been confirmed, the next step is to configure your device.
6. WiFi Configuration for Windows, Mac, and iOS
Before using your Iridium AxcessPoint Mail & Web application, you will need to set up the Wi ‐ Fi hotspot with
your Iridium AxcessPoint.

Connect your Iridium AxcessPoint device to your Iridium satellite phone with the included USB cable.

Set up the phone in an outdoor area with open access to the sky and adequate signal strength prior to use.

Turn your Iridium AxcessPoint device switch ON when attempting to establish a Wi ‐ Fi hotspot. When two
of three lights on the Iridium AxcessPoint device are green, you can connect your Wi ‐ Fi enabled device and
use your Iridium AxcessPoint Mail & Web to send emails and browse the Internet.
You will now need to configure your supported WiFi device to connect to the Wi ‐ Fi hotspot.
Windows Setup

To open a network connection, click on the network connection at the bottom right hand side. This will
open up a list of network connections available.

Select PHS300IC ‐ xxx
MAC OS Setup

Open your MAC’s wireless connection list by clicking the “Airport” icon on the menu bar

Select PHS300IC ‐ xxxx
iOS Devices Setup

Go to Settings

Select Wi ‐ Fi

Under Choose a Network, select PHS300IC ‐ xxxx