Operation
13103F-EN
25
REFERENCE
See Using the Two-
Position Eye Safety Filter
in this manual for
instructions on closing the
filter.
REFERENCE
See the Clinical and
Safety sections of your
console manual and this
manual for important laser
safety eyewear
information.
WARNING
Always keep the console
in Standby mode when
you are not treating a
patient. Maintaining the
console in Standby mode
prevents accidental laser
exposure if the footswitch
is inadvertently pressed.
REFERENCE
See the Inspecting and
Cleaning sections of your
console manual and this
manual for cleaning and
storage instructions.
Treating a Patient
1. Set the treatment parameters.
2. Position the patient.
3. If used, close the two-position eye safety filter.
4. Ensure that all ancillary personnel in the treatment room are wearing
the appropriate laser safety eyewear.
5. Select Treat mode.
6. Position the aiming beam on the treatment site.
7. If desired, adjust the intensity of the red aiming beam.
8. Press the footswitch to deliver the treatment beam.
9. When you do not require the treatment beam, remove your foot from
the footswitch and place the console in Standby mode.
Summary of Contents for EndoProbe
