background image

07

06

Menory

Menory

Method of usage

Method of usage

Note: The specific displays referto 
the actual object of this product!

1.Switch power supply on

Diagram of plug in

Diagram of the switch position of power supply

2.Start to massage

1). Press power button, massage chair automatically reclining, and start massage.
2). Automatic shoulder position and massage acupressure point detection, waiting 

for the completion of testing.

3). If there is difference with the massage balls and the actual shoulder position, 

youcan adjust the up and down button to a suitable position. Shoulder position 
has 10 grades adjustable.It will run automatic massage if there is noadjustment 
on shoulder position within 10 seconds

Button

Description

Display

Move the massage balls upward to a suitable position

Move the massage balls downward to a suitable position

Shoulder

adjust

High shoulder position  

suitable shoulder position 

Low shoulder position

4) Choose massage function to massage
    Memory function massage

Function

Button

Display

Memory 
massage

Press button 

Upper body / M1 

or 

Lower body /M2 

for 3 seconds, then 

enter into memory massage function 

M1

 or 

M2

 , it will revert to the 

previous memory massage mode.

Summary of Contents for SL-A38











Reviews: