background image

11

10

Set with safety switch in a power supply 
box, if there is heavy pressure on power 
supply box, then forced stop back lying 
function, prevent hurts peoplewhen lying.

Method of usage

Method of usage

3.Turn off power, stop massage

3) Cut off the power of the whole machine.
    Figure (Switch power off)

Diagram of the switch position of power supply

Power switch method map

WARNING

Other manual function

Function

Button

Description

Calf rise 
and drop

Backrest rise 

and drop

Auto lay 
down mode

Calf rest lifting button, press this button, calf restlifting slowly, 
stop when release it
Calf rest decline button, press this button, calf rest decline 
slowly, stop when release it

Backrest lifting button, press this button, backrest lifting slowly, 
stop when release it

Backrest decline button, press this button, backrest decline 
slowly, stop when release it

with three modes circulation function, when press the button, 
turn into auto lay downmode. 

1)Press power button during massage progress, all massage function will be stop 

immediately, the backrest and footrest will return to original position automatically, 
meanwhile you can set up memory function. After rated working time, all massage 
functions will be finished, meanwhile you can set up memory function, but 
backrest and footrest won't return to original position.

2)Memory store function: After rated working time or switch off, the hand controller 

displays "Memory" and glitter, remind the users whether need to store the 
massage mode before turn off, you can press the memory function buttons 

M1

 or

M2

 as you like, store the massage mode.

Open the master carton, take down the calf rest. (figure 1)              
Remove the back cushion (note: please ensure the heat wire in the cushion was 

    unplugged before remove). (figure 2)

Figure 1

Figure 2

Zip the backrest kneading cloth open completely, put the cloth on the top of chair 

    (note: please remember to prevent the kneading cloth from dirty or damage).
    ( figure 3)

The calf rest decoration cover is card slot design, make an effort to pull it when 

    disassembly. (figure 4)

Figure 3

Figure 4

Pull

Unscrew the 8 screws of front dam-board (NEED NOT unscrew the 4 screws on 

    the bottom). (figure 5) 

Open the front dam-board, unplug the joint of air pipe and power cord 

    corresponding to armrest. (figure 6)

Figure 5

Figure 6

4.Armrest disassembly method

Note: this method is only use for cannot easy move into small space, such as too 
small room door, please do not arbitrarily disassemble.

Summary of Contents for SL-A38











Reviews: