Quick-Start-Manual
All technical data are subject to change w/o further notice... © Irenis GmbH 06-2021.................................... - 3 -
Appearance:
DC-Jack 12V, 100BaseT Ethernet (264 versions only) or GbE (265 versions), Status LEDs, HDMI IN,
RESET Button-hole, HDE-265(L) (L=Loop out) have an additional 3.5mm Stereo Jack Audio-Input:
Variant with SDI Inputs: SDE-265 (no 264 available any more)
SDI-Versions have a loop through to cascade the Input to other SDI-devices...
Available 1RU Versions: 1264 / 1265 and 4264 (ADE and HDE-Versions as well as SDE) Example:
Front
REAR example ADE-4264 = CVBS + HDMI support (ADE-264 has a separate Flyer and quick start)
12xy means 1 encoder, 42xy means 4 Encoders (xy can be (2)64 or (2)65 = MPEG4 or HEVC compatible)
A = Analog (CVBS + HDMI support), S=SDI, H= only HDMI – Versions
Rear of HDE-4264/-4265
Attention:
Because of a cut in the hardware for the HDE-265:
From November 2020 production on, the chipset has been changed to the HDE-265L. So if ordering the
HDE-1265 in 1RU later on, it is based on the new one. Therefore the firmware is different too and to be
considered when updating. The normal
HDE-265 boxed
version latest firmware was:
6.53E
while the
HDE-265L
and new produced
HDE-1265
is actually
5.05
. The difference can be detected in the web-IF in the
top frame or because the new one supports
1x Main encoder and 3x secondary encoder
streamer parts.
Example Sticker with default settings (MAC may be different)
Note: HDE-4264B has been redesigned with 4x GbE outputs
now to be independent per encoding process-Streaming and
might use different networks to stream to.
