Quick-Start-Manual
All technical data are subject to change w/o further notice... © Irenis GmbH 06-2021.................................... - 25 -
SRT Latency can be adjusted in SYSTEM Firmware Version 6.53 onwards and encoder type
dependent…:
It’s a faster transport protocol for lower latency over public networks…
Check the Status page:
Usually SRT URL is OK for simple streaming from Encoder to the Client (media player, VLC,
STB – but need to have SRT support in the client software).
For P2P direct streaming, select SRT PUSH and enter the destination IP Address and Port. Both
source and destination (STB or VLC-PC or Decoder) have to be in the same subnet. Example:
Over VPN, both devices need to ‘see’ each other (i.e. use PING).
You can check it by VLC: (please note, the @ in the URI is not necessary like in udp/rtp)
