iRay Technology Cabin Series, User Manual

Page: 9 / 18

13 14
GRAVITY SENSOR
Turn the Gravity Sensor on/off
Press & hold the Menu Button (7) to access the Main Menu Interface.
Short press the Up/Zoom Button (6) or Down/Photo Button (8)
to select the Gravity Sensor option.
Short press the Menu Button (7) to enable or disable the
Gravity Sensor.
After the Gravity Sensor is enabled, its functions will be displayed
on both sides of the Screen. The Curved Ruler on the left
represents the Tilt Angle and the Vertical Ruler on the right
represents the Pitch Angle.
LASER CURSOR CALIBRATION
If the laser cursor differs from laser pointer point of impact, you
can use this function to calibrate the cursor.
Long press the Menu Button (7) to access the Menu, short press
the Up/Zoom Button (6) or Down/Photo Button (8) until you
select the Laser Pointer Calibrate option.
Short press the Menu Button (7) to enter Laser Calibration. The
laser indicator is enabled automatically.
The laser pointer appears in the middle of the screen and the
following prompts are displayed in the upper left corner:
• X indicates the X-axis in the horizontal direction
• Y indicates the Y-axis in the vertical direction
• Center allows the pointer to return to the center of the screen
• Default allows the pointer to recover to factory settings
Short press the Up/Zoom Button (6) or Down/Photo Button (8)
to switch between options and short press the Menu Button (7)
to confirm the selection.
When selecting the X or Y axis, the icon of the selected option
will keep blinking. Press the
Up/Zoom Button (6) or Down/Photo
Button (8) to move the pointer. If you press the Up/Zoom Button
(6), the pointer will move left/up. If you press the Down/Photo
Button (8), the pointer will move right/down. A short press moves
the pointer a pixel each time, and a long press moves the pointer
by 10 pixels each time.
If center/default is selected, the pointer will return to the center/
default position after you short press the
Menu Button (7).
After moving the cursor to the location indicated by the laser,
press and hold the
Menu Button (7) to save the location and
return to the home screen.
WI-FI
Turn Wi-Fi on/off
Press & hold the Menu Button (7) to access the Main Menu Interface.
Short press the
Up/Zoom Button (6) or Down/Photo Button (8)
to select the Wi-Fi option.
Short press the Menu Button (7) to enable or disable Wi-Fi.
The icon in the Status Bar changes accordingly after this option is
enabled or disabled.
VIDEO OUTPUT
Turn Video Output on/off
Press & hold the Menu Button (7) to access the Main Menu Interface.
Short press Up/Zoom Button (6) or Down/Photo Button (8) to
select the Video Output option.
Short press the Menu Button (7) to enable or disable Analog
Video Output.
The icon in the Status Bar changes accordingly after this option is
enabled or disabled.
CALIBRATION
Select calibration mode
There are three calibration modes: Automatic (A), Manual (M)
and Background (B)
Press & hold the Menu Button (7) to access the Main Menu interface.
Short press the Up/Zoom Button (6) or Down/Photo Button (8)
to select the Calibration Mode.
Short press the Menu Button (7) to enter the Secondary Menu of
the Calibration function.
Short press the Up/Zoom Button (6) or Down/Photo Button (8)
to select a mode from the following three choices:
Automatic (A): The image will be calibrated automatically.
Manual (M): The image will be calibrated by the user according
to the level of image effect.
Background (B): The lens needs to be covered with a lens cap
in this mode. The image will be calibrated manually by the user
according to the level of image effect
Short press the Menu Button (7) to confirm the selection. The
icon in the status bar will also change.
DIGITAL COMPASS
Turn the Digital Compass on/off
Press & hold the Menu Button (7) to access the Main Menu Interface.
Short press the Up/Zoom Button (6) or Down/Photo Button (8) to
select Digital Compass option.
Short press the Menu Button (7) will enable or disable the Digital
Compass function.
After the Digital Compass is enabled, its icon will be displayed in
the middle of the status bar.