Iradion Infinity 1510, Operator'S Manual

Page: 12 / 27

12
Quick Start Connection Guide
There are two connectors on the rear of the laser available for operation of the laser. The 15
pi
n “D” connector contains all the available connections for operation. The RJ-45 connector
contains a basic set of connections.
Power Cable, All Lasers
Designation Pin Description Comment
Black - Power Ground 10 gauge wire to power supply Ground
Red - Power VDC positive
connection 10 gauge wire to power supply
Connector (RJ-45), All Lasers
Designation Pin Description Comment
RJ-45 1 Modulation High in TTL relative to GND or Pin 6. (Page 9)
RJ-45 2 Fault LED drive pin Grounded Cathode.
RJ-45 3 Interlock Grounded Interlock will enable laser.
RJ-45 4 CTL TXD RS232 Comm line.
RJ-45 5 CTL RXD RS232 Comm line.
RJ-45 6 Modulation low in This line grounded or driven
independently for command line
isolation. (Page 9)
RJ-45 7 Ground System GND.
RJ-45 8 Ground System GND.