Iradion Infinity 1510, Operator'S Manual

Page: 10 / 27

10
Introduction
This guide provides the basic information needed to operate an Iradion Laser. This laser is
designed for use while integrated within a system and is
not designed to meet CDRH
requirements as a stand-alone product . As such, the user must be aware of certain
requirements before use.
CDRH
This is an OEM laser component that has been designed for integration into a functioning laser
system. As a stand-alone device, it cannot be turned on and therefore does not incorporate all
of the safety features required by the Center for Devices and Radiological Health (CDRH).
Provisions for the incorporation of these safety features are available, and it is expected that the
user will apply them and fully comply with all CDRH requirements.
Available Safety Features
The following safety features are available as electronic signals on the rear panel interface:
Interlock Upon contact closure, allows the system to operate. An open
connection will prohibit the laser from firing.
Key switch
Upon contact closure, allows the laser to fire after imposing a 5-
second delay. (Key switch function is program version dependent.)
Power up in Fault
Requires the key switch to be cycled. (Program version dependent.)
Lase signal Output signal indicating the laser is firing.
Fault signal
Output signal indicating the malfunction of an internal component or
the electronics.
Indicator lights
DC Power, Temp Warning, Interlock, Fault, Ready, Lase.