OPERATION
A short press at upper/lower position of the button will
transmit a command to turn on/off the lighting of groups
assigned. Press and hold at upper/lower position of the
button will increase/decrease the output level of grouped
lighting respectively.
1. Turn On the light
A SHORT press (≤0.5 second) at the UPPER part of button
will transmit a command to turn on the grouped lighting.
Light will stay on as long as the grouped sensor(s) detects
the occupancy, and the grouped sensor will resume control
after the area is vacated.
2. Turn Off the light
A SHORT press (≤0.5 second) at the LOWER part of button
will transmit a command to turn off the grouped lighting.
The grouped sensor will resume control after the delay time
elapsed.
3. Ramp up the light
A LONG press (
≧
0.5 second) at the UPPER part of button
will enter into dimming adjustment mode to increase the
output level of grouped lighting. Intermittent press on the
button during dimming control mode will adjust the output
level step by step. The device will exit from dimming
adjustment mode 2 seconds after the last button operation.
4. Fade down the light
A LONG press (
≧
0.5 second) at the LOWER part of button
will enter into dimming adjustment mode to decrease the
output level of grouped lighting. Intermittent press on the
button during dimming control mode will adjust the output
level step by step. The device will exit from dimming
adjustment mode 2 seconds after the last button operation.
NOTE:
After changing the dim level, allow the LED bar to
turn off before trying to switch on/off.
GROUP LINK
After installing completed, the
Programming Guide
ON-PBD-705 requires grouping to
link with the OS-NET network. To
group and link the device, you
would need an SRP-281 OS-NET
Remote Programmer to conduct
the grouping process by pointing
toward the target device. Refer to
the OS-NET Programming Guide
available from www.irtec.com for more details about
grouping procedures.
NOTE:
Grouping data can be read on the remote by
conducting a download process with the remote face to the
device.
SPECIFICATIONS
Power voltage
120/277VAC, 50/60 Hz
Wireless protocol
Modified Zigbee Light Link (ZLL)
Radio frequency
2.4 GHz
Radio range
Typical 50 ft. @indoor
Op. humidity
Max 95% non-condensation
Op. temperature
14°F ~ 122°F (-10°C ~ 50°C)
Dimensions
4.13”H x 1.77”W x 1.65”D (w/mounting plate)
www.irtec.com
WARRANTY
IR-TEC International Ltd. warranties this product to be free of
defects in materials or workmanship for a period of five years
from date of shipment. There are no obligations or liabilities
on the part of IR-TEC International Ltd. for consequential
damages arising out or in connection with the use or
performance of this product or other indirect damages with
respect to loss of property, revenue, profit, or cost of removal,
installation or reinstallation.
4.47”
3.81”
4.13”
3.28”
2.75”
2.73”
1.77”
DIMENSIONS
1.22”
