GW-ETH-02A
Operation Mode
The
Operation mode
tab provides the setting of the gateway.
Mode
•
Dataloger
The datalogger is active. Its content can be read using IQRF Cloud server (if enabled), GW web
server or IQRF IDE GW Tool.
•
Gateway
UDP channel is active. It is direct connection to the GW (without IQRF Cloud) using the
application protocol described in chapter
Application protocol
.
Communication ports can be selected in the
Gateway
field -
Port
and
Remote port
.
Logger
•
Packet Size
The size dedicated for the data log in the gateway memory. By default, this value is set to 64 B,
the same as the maximum size of the IQRF packet. Shorter packets allow to store more data
logs. Minimum packet size is 1 B. When an IQRF packet oversizes the selected packet size, a
part of user data is lost.
When the packet size is changed the content of internal memory is cleared.
IQRF Cloud
•
Period
Defines how often the gateway transmits the data to IQRF Cloud server. Allowed values are from
2 s to 24 hours.
•
Use IQRF Cloud hosted by CIS
The gateway is configured by default to communicate with IQRF Cloud server
provided by CIS. Any gateway can also communicate with another IQRF Cloud server provided
by anyone else. In such a case, the checkbox must be unchecked and the following fields must
be filled.
•
AES key
Encryption key used for secure communication between the gateway and the IQRF Cloud server.
The same key must also be specified at the server side.
•
Cloud path
The URL address where IQRF Cloud server is hosted. The
'/cloud'
substring must follow
•
Cloud port
The TCP port used. In most cases port 80 is used.
Gateway
•
GW Port
UDP port for the GW side.
•
Remote port
UDP port for a remote device side.
© 2016 MICRORISC s.r.o.
www.iqrf.org
User_Guide_GW-ETH-02A_ 160208
Page 14
